Viva-ProE System

Pouzdan desktop sistem dokazanih performansi

Viva-ProE® System sa EMIT® tehnologijom asistira u optimizaciji vaše ustanove tako što donosi efikasne rezultate testiranja koncentracije lekova u okviru jedinstvenog stonog rešenja. Viva-ProE System je nov, fleksibilan pristup koji omogućuje još jednostavniju upotrebu, povećava efikasnost rada. Sadrži kompletan meni testova koncentracija lekova u jednom moćnom sistemu.
Syva® EMIT® DAT Assays
Amphetamines
6-Acetylmorphine
Barbiturate
Benzodiazepine
Cocaine Metabolite
Cannabinoid
Ecstasy
Ethyl Alcohol
LSD
Methadone
Methaqualone
Opiate
Phencyclidine
Propoxyphene

Distributed Assays
Buprenorphine*
Meperidine*
Oxycodone (FDA cleared)
Tramadol*

Syva® EMIT® Serum Tox™ Assays
Acetaminophen
Barbiturate
Benzodiazepine
Salicylic Acid
Tricyclic Antidepressants

Syva® Validity SVT Assays
Creatinine
Nitrites
Oxidants
pH
Specific Gravity

Throughput
Up to 133 EMIT® tests per hour with two reagents
Up to 65 EMIT® tests per hour with three reagents
Reagent system
EMIT reagent rotor — with 13 positions for 14 mL bottles and 13 positions for 28 mL bottles
All positions in both rotors can be assigned as R1, R2, and R3
The reagent rotor compartment is cooled to 8–12°C (absolute up to 25°C ambient temperature)
Reagent volumes:
– Reagent 1 volume 110–399 μL
– Reagent 2 volume 10–289 μL
– Reagent 3 volume 10–289 μL
Aspirated reagents are heated, with level detector and integrated stirrer
Sample system – providing semi-continuous
loading
Sample rotor contains:
– 50 positions for barcoded tubes
– 12 positions for tubes without barcodes
– 1 blank and 1 washing position
Primary tubes (13 or 16 mm OD)
Positions can contain 5 mL or 10 mL primary tubes or sample cups
Sample volume 1 – 30 µL per test, programmable in steps of 0.1 µL
Sample probe with level detection and integrated stirrer
Pipetting system
Flex Fluidics syringes
Reagent syringe 1000 μL
Sample syringe 100 μL
Cuvette rotor
Semi-disposable rotor with 48 cuvettes, path length 6.8 mm
Minimum measuring volume 200 μL
Measuring temperature 37°C controlled by Peltier elements
Washing units
Cuvette rinsing with 4 x 500 μL of treated water:
– The unit is equipped with liquid sensors
– Waste is separated into diluted and
concentrated waste
– Cuvettes are dried before use
Light source Quartz-iodine lamp 12 V – 20 W
Wavelength range
Automatic wavelength selection by an 8-position filterwheel (340, 415, 505, 546, 570, 600, 660, 700 nm)
Half bandwidth 8 to 12 nm
Photometric range Absorbance -0.1 to 3.0
Ambient temperature
15–32°
Relative humidity 15–85% (non condensing)
Calculation modes
Linear regression
Modified cubic spline
Syva® 4 parameter logit log
Quality control
Up to 6 controls per parameter (up to 12 controls programmable per rotor configuration)
Westgard rules
Levey-Jennings plots
Computer
CPU: Intel Celeron M 575 2 GHz
Touchscreen monitor: 15.6 inch, 1366 x 768 pixels
Ports: 1 serial, 4 USB, and 1 ethernet port
Printer
The application supports one printer
Most printers supported by WINDOWS can be connected
Barcode reader (option)
The Viva-ProE™ is equipped with an internal barcode reader to read barcoded sample tubes. An optional hand-held barcode reader is available.
Languages English, French, German, Italian, Spanish; others on request
Dimensions
Width: 125 cm/49.2 in
Depth: 62 cm/24.4 in
Height, excl monitor: 75 cm/29.5 in
Weight: approx. 93 kg/205 lbs (excl. monitory
arm and panel PC)